Bath Accessories Doux Matte Black 18" Towel Bar YB0218BL
Pullcast
SKU: YB0218BL
A graceful arc and unique, soft-stream water flow, make Doux the perfect addition to any Bath interior as it redefines Modern in the language of great design. The D-shaped spout was carefully crafted to present the water in a flat, thin silky ribbon to continue the clean lines of the faucet's smooth, wide form.
Materials:
Towel Bar posts are constructed of zinc. Bar is stainless steel.
Benefits
-Matte black finish is the perfect complement to modern spaces
-Limited lifetime warranty
Installation Instructions:
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Using the horizontal holes for drywall installation OR the vertical holes
for installation into a stud, mark the hole locations at each mounting post for your
corresponding product OR drill two ΒΌ" pilot holes at the corresponding location.
4. Remove the template from the wall.
5. Using a #2 Phillips head screwdriver, screw the provided anchors into the wall
until flush.
6. Remove mounting post from the product assemblies by loosening each set screw
with the provided hex wrench.
7. One at a time, place each mounting post over the anchors (with the arrow facing
up) and insert provided screws through the post into the anchors.
8. Tighten screws.
9. Assemble the towel bar and posts.
10. While assembled, position each end post with setscrews facing down and place over both mounting posts. Tighten the setscrew at the bottom of each post.
Showroom Jakarta : Perumahan Alam Sutera, Jl. Jalur Sutera No.23D, RT.002/RW.006, Panunggangan Tim., Kec. Pinang, Kota
Tangerang, Banten 15143
Showroom Surabaya : Jl. Raya Geluran No.28, Geluran, Kec. Taman, Kabupaten Sidoarjo, Jawa Timur 61257
Instagram : @bottegaartisan
Materials:
Towel Bar posts are constructed of zinc. Bar is stainless steel.
Benefits
-Matte black finish is the perfect complement to modern spaces
-Limited lifetime warranty
Installation Instructions:
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Using the horizontal holes for drywall installation OR the vertical holes
for installation into a stud, mark the hole locations at each mounting post for your
corresponding product OR drill two ΒΌ" pilot holes at the corresponding location.
4. Remove the template from the wall.
5. Using a #2 Phillips head screwdriver, screw the provided anchors into the wall
until flush.
6. Remove mounting post from the product assemblies by loosening each set screw
with the provided hex wrench.
7. One at a time, place each mounting post over the anchors (with the arrow facing
up) and insert provided screws through the post into the anchors.
8. Tighten screws.
9. Assemble the towel bar and posts.
10. While assembled, position each end post with setscrews facing down and place over both mounting posts. Tighten the setscrew at the bottom of each post.
Showroom Jakarta : Perumahan Alam Sutera, Jl. Jalur Sutera No.23D, RT.002/RW.006, Panunggangan Tim., Kec. Pinang, Kota
Tangerang, Banten 15143
Showroom Surabaya : Jl. Raya Geluran No.28, Geluran, Kec. Taman, Kabupaten Sidoarjo, Jawa Timur 61257
Instagram : @bottegaartisan